Raised Flooring System

Type 112140

This system for higher re­quires. Made of highly com­pressed chipboard panel -E1 with excellent sound absorption and thermal in­sulation qualities. The bottom and top side is covered with a galvanized steel sheet for reinforce­ment the load bearing capacity. The edges are sealed with a special edge trim. The substructure is made of height adjustab-led steel pedestals which are glued on the subsoil. The conductivity (Re) of the system will be war­ranted constructiv and through adapted floor coverings. Continuously controls through us and foreign offices with securi­ty certificates guaranted a raised floor system accor­ding to the accepted rules of the technics.


  Office, phone exchange, lecture room and   trainings room

  Thickness of panel:

  38,8 mm

  Bottom side:

  Galvanized steel sheet


  All adapted raised floor covers

  Static of the panel:


  Single load:

  7.000 N/panel

  Distributed load:

  30.000 N/sqm

  Static of the system:

  Safety direction line BVS

  Load increment:


  Normal point load:

  5.000 N

  Safety point load:

  10.000 N

  Building material class according   to DIN 4102



  600 x 600 mm


  13,2 kg/panel (without covering)

  Sound test according to
  DIN 52210 Weight, lateral
  sound reductionindes:

  RLWP 52 dB*

  Weight normalized
  impact sound level:

  LNWP 43 dB*

  Reduction of impact noise:

  LWP 15 dB*


  Galvanized steel pedestals, for FFH 65 -1.325   mm